Protecti̇ons Through Canal Beari̇ng
ABOUT PRODUCT

      •  Canal bearing protections moves as geting guided in their rail systems.
      •  Gets assembled between its own columns without an need of sliding rails.
      •  Can be installed vertically.
      •  Guide rails are used when a specific requirement occurs.


TELESCOPIC STEEL COVER SYSTEMS

Kozanlı engineering has been designing and manufacturing telescopic steel covers for all kinds of guideways since 2004. During this time more than 3000 telescopic steel cover systems have been designed and produced in various types.

Kozanlı Telescopic steel covers specifications:

      •  Convenient technical solutions
      •  Functional reliabilitiy
      •  Durability
      •  Protection aganist corrosion
      •  Tested standart components
      •  High-grade steel sheet

The selection of the suitable protection system for your machine is important. According to the ambient conditions and bearing shapes, it is possible to apply different protection methods. Although the appropriate measurements are enough to apply any of the solutions, the important point is to make it long lasting. Therefore, we need to make the right choice depending on both the environment and the measurements.
 


​The importance of the sensitivity of the slides


      •   Guideway manufacturers need to produce their products in a certain sensitivity. Processing tolerance of the machine in which these guideways are used, is determined by that sensitivity rates.
      •   The more sensitive guideways, the less processing tolerance. It is important to produce precisely. That is why customers who would like to buy a machine, tend to buy the one with the lowest processing tolerance.
      •   Tolerances of linear profiled guideways of INA are given below. Some parts, especially the edge support units, of the machine is needed to be protected in order to maintain that tolerance.
      •   Guideways that are produced with micrometer sensitivity particularly need to be protected to keep that tolerance.
      •   Uprotected guideways lose their sensitivity over time. Because the processing tolerances increase, the machine quality decreeses.
      •   Machine manufacturers generally use their own beaaring systems. To find the appropriate guideways in the market is quite hard and costs much.
      •   Therefore, it is necessary to protect the guideways.
 


 


 

How do they harm?

      •   Pollution in the work environment leads to deformation in the guideways.
      •   Deformation on the surface of the guideways and wear of the carriage wipers lead to pollution of the working surface of circulating bearings. This pollution may cause disintegration of the carrigage.
      •   Replacing the carriage may not always be the guaranteed solution, rails must also be replaced if necessary.
      •   This causes high maintenance costs.


 

From what the bearings must be protected?

      •   Powder
      •   Metal, wood, glass, plastic and  shavings
      •   Coolant , bor oil
      •   Welding slags
      •   high temperature environment
      •   exterior impacts

  Are direct factors affecting the bearings.

Kanal Yataklamalı

ATTACHED FILES

Kozanlı Mühendislik

Mustafa Kozanlı Müh. Mak. Elk. San. Ve Tic. Ltd. Şti. olarak, web sitemizden en verimli şekilde faydalanabilmeniz için çerezler kullanmaktayız. Bu teknolojilerin kullanımını 6698 sayılı KVK Kanunu’na uygun şekilde gerçekleştirmekteyiz. Çerez kullanımını kontrol etmek ve konu hakkında daha detaylı bilgi almak isterseniz; Kişisel Verilerin Korunması Politikası ile Çerez Politikası Aydınlatma Metni'ni inceleyebilirsiniz.